Save on Dog Flea and Tick
Hydroset Electronic ThermostatsHydroset Electronic ThermostatsHydroset Electronic Thermostats
  • Hydroset Electronic Thermostats
  • Hydroset Electronic Thermostats
  • Hydroset Electronic Thermostats
Image Gallery
http://www.petsolutions.com/images/Products/41400029.jpg

Hydroset Electronic Thermostats

 

The Hydor Hydroset Electronic Thermostat regulates the temperature of aquariums and terrariums when used with heating cables, heating mats or other heating systems up to max 300W (110/115V). The Thermostats are equipped with independent heating probes that work in both water and dry habitats. They are a more accurate Thermostat than built in thermostats because they have a remote temperature sensor. Simply attach the heating device and set the desired temperature. Choose from either the Thermostat with LCD digital display or the Thermostat with temperature control dial. Your heater should be between 3 to 5 watts per gallon of water.

Installation

  1. Position HYDROSET in a dry place and in such a way as to ensure it cannot fall into the water.
  2. Lower the probe into the aquarium, into an area with good water recirculation.
  3. Connect the heating device to HYDROSET and then connect HYDROSET to the mains.

How to Regulate The Temperature Using Hydroset without Display

  1. Turn the regulation knob until the indicator shows the value chosen.
  2. If the temperature is lower than the desired level, HYDROSET will automatically activate the heating device until the set temperature has been reached. A light will come on during this stage.
  3. The temperature can be set from a min. of 18°C to a max. of 35°C.

How to Regulate The Temperature Using Hydroset with Display

  1. The temperature set is indicated on the right side of the display; the temperature measured by the probe is indicated on the left.
  2. Turn the regulation knob until it shows the desired temperature.
  3. If the temperature is lower than the desired level, HYDROSET will automatically activate the heating device until the set temperature has been reached. The symbol 0 will appear on the bottom left of the display during this stage.
  4. The temperature can be set from a min. of 5°C to a max. of 35°C.
Previously Viewed Items